DOORS (Include Curtain Panels, Tension Adjuster, Axle Drums, Track, Stiffener, Springs, Latches and Hardware Kit)
All BETCO doors include Door Curtain Panels, Tension Adjuster, Axle Drums, Door Track, Door Stiffener, Door Springs, Latches and a Hardware Kit.
Save on shipping with free local pickup from our Statesville, NC facility. Choose "Pickup at BETCO Factory" during checkout.
Doors are pre-painted with a high-durability finish and come with a 40-year paint warranty. Doors are available in a variety of colors* at no additional cost. Maximum of 2 doors per order. Please call 1-844-240-8831 for volume orders.
Door Curtain Panels
Made of 26 or 27 gauge roll-formed galvanized steel that provides for high-wind strength and minimum flex. Hydraulically pressed, crimped offset interlock that prevents panel separation during repeated use. Material is fabricated on automated state of the art equipment that ensures curtain is square and securely crimped together to prevent panel separation during repeated use.
Heavy-duty,18-gauge G90 galvanized steel provides additional panel clearance when door is being closed to prevent door curtain damage. Polyethylene edge wear guards are locked to both track edges to ensure protection against door wear and misalignment.
Designed, manufactured and calibrated to operate without adjustment and with maximized cycle life. Door springs come with a 10-year warranty on new door purchases.
*Colors shown online are an approximation. Actual color may vary.
The terms and conditions of sale of BETCO, which can be found on the BETCO website (www.betcoinc.com), apply to all transactions between the parties.
1. Concealed damage/shortages must be reported within 7 days; therefore product should be installed as soon as possible in order for any concerns to be reported. After 7 days of receipt, SRD cannot assume responsibility for damage, as we have no control over the condition of the door once received by customer.
2. Doors are packaged and loaded with care to minimize transit damage. However, due to road conditions and shipper handling procedures outside our control, there are exceptions. Small dents or dings as well as light paint damage due to wear and tear in transit are classified as normal and therefore not an approved reason to return or refuse delivery of the door. We will supply touch up paint but cannot accept a return of the door under these conditions.
3. According to the Door & Access Systems Manufacturers Association (DASMA), "a common occurrence with rolling door products, under normal usage of such products, is the wearing away of the painted surface of the curtain. This condition occurs as the result of the curtain repeatedly coiling upon itself, and then repeatedly uncoiling, upon the opening and closing of a rolling door." Therefore normal wear and tear from metal to metal contact is not covered under the SRD paint warranties.
4. Visible shipping damages other than those stipulated in item #1 above need to be reported immediately. If you see physical damage to the carton, please show it to the delivery person and ask permission to open and inspect the package before signing for it. If you notice damage to the item inside the carton DO NOT ACCEPT IT AND DO NOT SIGN FOR IT! Simply inform the driver that you are refusing delivery due to damage and contact us at once to make a report so we can have a replacement shipped to you immediately. Please check your door(s) upon arrival as steelrollupdoors.com cannot be responsible for any damages or missing items once you have already signed for them. In the rare case that there is damage to your door upon arrival, please note as such on your bill of lading with your driver and contact us immediately to report the damage at 800-654-7813 ext. 2090 or 2050.
Posted by Peter Jahnke on Oct 23rd 2016
I ordered this door back in May 2016, due to some delays in the permit process, I only now got around to installing it. Very easy to install, very well manufactured, came with everything needed to install on my shed, very happy with this product and the price was right.